Aluminum Sectional Rail and Stile Doors
This benchmark commercial door provides Raynor reliability and durability to meet, or exceed, the requirements of daily use. With 1-3/4″ thick door sections and streamlined rail construction, the Raynor AlumaView AV175 door is engineered for lasting beauty and durability.
AV175 Features and Options
Raynor AlumaView AV175 aluminum commercial doors are available with numerous features and options, including those listed below.
Years of Durability
AV175 door sections are clear-anodized for maximum durability and are designed to withstand minimum wind loads of 15 p.s.f.
Rugged Hardware and Springs
Your AlumaView door comes packaged with the right combination of hardware, track, and springs to match your door’s size and application.
Decreased Energy Costs
AlumaView doors help you reduce energy costs with a U-shaped, vinyl bottom weatherseal secured by a sturdy aluminum retainer.
Snap-in Retainer
AlumaView panels and glass are sealed and held in place with a snap-in retainer. Clear anodized, RAL9003, RAL 9016 and standard white doors use gray snap-ins. All other doors use black snap-ins.
Customized Track*
Track systems are supplied to fit special clearances, inclines or contour applications. Hardware and track systems can be customized to fit any need. Additional trussing is available for special wind loading applications. A QuikClip™ pre-assembled track option is also available.
*Some options may be limited to door size or model.
Header Seal
Flexible vinyl flap header seal reduces air infiltration and energy costs by sealing the top of the door against the header.
Jamb Seal
EPDM rubber jamb seal also helps to reduce air infiltration and decrease energy costs by sealing the side of the door when closed.
Choice of Windows
For maximum design flexibility, choose from tempered, tinted, double-strength, insulated, acrylic, polycarbonate or impact-resistant glass in a variety of thicknesses.
EnduraCote™
The Raynor EnduraCote hardware system comes with springs, track, and hardware that are powder coated to provide a clean, finished look and maximum protection against rust.
Anodized Finishes
Choose from six custom anodize finishes including champagne, light bronze, medium bronze, dark bronze, extra dark bronze, or black.
Aluminum Panels
For busy work environments and to prevent glass breakage, aluminum panels protect your investment. Choose from impact resistant and insulated panels as well.
High-cycle Counterbalance System
For reliable operation in high-traffic areas, choose high-cycle torsion springs with 25,000, 50,000, or 100,000-cycle life. For reduced maintenance and ultra-smooth operation in heavy-use applications, choose a weight counterbalance system.
Locks
In applications where control and access are important, choose from a variety of locking options to help keep your building secure. Locks come in both inside and outside variations.
Carbon Monoxide Vent
Allows you to channel fumes to the outside when the AV175 door is closed. Available in a variety of sizes.
Colors
Anodized Aluminum: Standard – Clear | Optional – Champagne, Black, or Light, Medium, Dark, or Extra Dark Bronze.
ArmorBrite™ Powder Coat System
Custom Colors: ArmorBrite: 188 custom powder coated colors available.
Product Details
Door | ||
Type | Commercial Sectional Garage Doors | |
Model | AlumaView AV175 | |
Size | 16′ x 14′ Max | |
Operation | Manual, Motor or Hand Chain | |
Sections | ||
Construction | Rail & Stile – minimum .05″, 5/16″ diameter screws | |
Material | Aluminum | |
Surface Texture | Smooth | |
Section Joint | Ship Lap | |
Section Thickness | 1-3/4″ | |
Gauge | N/A | |
Stiles | Extruded aluminum – minimum .05″ | |
Insulation | 3/8″ Expanded Polystyrene (in panels only) | |
Seals | Bottom Seal (3″, 4″ Gray; 3″ Yellow; or 3″ Black EPDM), Optional EPDM Header Seal | |
Trussing | Material: Optional U-bar (18-Gauge or 20-Gauge – can have up to 1 U-bar per door) | |
Panel Configuration | NA | |
Color | Clear Anodized or Optional: ArmorBrite Powder Coat System 188 custom colors available, or Bronze Anodized, Black Anodized | |
Windows | 1/8″ DSB Glass; 1/8″ 1/4″ 3/16″ Clear Tempered Glass; 1/8″ 1/4″ Tinted or Tinted Tempered Glass; 3/16″ 1/4″ Clear Glass; 1/4″ Clear Laminated Glass; 1/4″ Clear Wire Glass; 1/2″ Insulated DSB Glass | |
Track | ||
Type | Normal Headroom, Rear Mount Low Headroom, Front Mount Low Headroom, Lift Clearance, Vertical Lift, Incline, Contour, and QuikClip™ Pre-Assembled Track Options | |
Finish | Galvanized or Optional White Powder Coat | |
Size | 2″ or 3″ | |
Gauge | 13 and 16-Gauge | |
Counterbalance System | ||
Type | Torsion Spring, Tandem Shaft Torsion Spring, or Weight Counterbalance | |
Springs | Spring Inner Diameter: 2-1/4″, 3-1/2″ or 5-1/2″; Duplex or High Cycle (30K, 50K, 100K); Optional Black Powder Coat | |
Shafts | Tube (13-Gauge) or Solid (D-Shaft, 1″ Keyed) | |
Hardware/Accessories | ||
Hinges | 11, 13, 14-Gauge or Hybrid | |
Rollers | Standard (2″ or 3″) or Heavy Duty (2″ or 3″) | |
Finish | Galvanized or Optional White Powder Coat | |
Lock | Interior Slide Lock or Exterior Lock Bars | |
Seal(s) | Jamb Seal | |
Hanger Angle | 11, 13-Gauge Galvanized or 13-Gauge White Powder Coated |
Specifications and Drawings
Specifications | Word Document | PDF document |
Raynor Quick Spec | Microsoft Word Document | PDF Document |
CSI Master Format | Microsoft Word Document | PDF Document |
Standard Drawings
2-inch Track/Bracket-Mounted | ||
Normal Headroom | DWG Drawing | Adobe PDF Document |
Lift Clearance | DWG Drawing | Adobe PDF Document |
Vertical Lift | DWG Drawing | Adobe PDF Document |
Low Headroom Front-Mount | DWG Drawing | Adobe PDF Document |
Low Headroom Rear-Mount | DWG Drawing | Adobe PDF Document |
2-inch Track/Angle-Mounted | ||
Normal Headroom | DWG Drawing | Adobe PDF Document |
Lift Clearance | DWG Drawing | Adobe PDF Document |
Vertical Lift | DWG Drawing | Adobe PDF Document |
Low Headroom Front-Mount | DWG Drawing | Adobe PDF Document |
Low Headroom Rear-Mount | DWG Drawing | Adobe PDF Document |
3-inch Track/Angle-Mounted | ||
Normal Headroom | DWG Drawing | Adobe PDF Document |
Lift Clearance | DWG Drawing | Adobe PDF Document |
Vertical Lift | DWG Drawing | Adobe PDF Document |
Low Headroom Front-Mount | DWG Drawing | Adobe PDF Document |
Low Headroom Rear-Mount | DWG Drawing | Adobe PDF Document |
Technical Information
Section and Panel Schedules
Door Width | Number of Panels | Door Height | Number of Sections | |
---|---|---|---|---|
Up to 8′ 6″ | 2 | Up to 8′ 6″ | 4 | |
8′ 7″ – 11′ 11″ | 3 | 8′ 7″ – 10′ 6″ | 5 | |
12′ 0″ – 14′ 2″ | 4 | 10′ 7″ – 12′ 6″ | 6 | |
12′ 7″ – 14′ 2″ | 7 |
AlumaView Warranty
Door Sections
Raynor® warrants the door sections against defects in material and workmanship for five (5) years from date of delivery to the original purchaser. Window components are warranted against defects in material and workmanship for three (3) years from date of delivery to the original purchaser.
Hardware and Springs
Raynor warrants all hardware and spring components against defects in material and workmanship for one (1) year from date of delivery to the original purchaser.
ARMORBRITE™
Doors equipped with AmorBrite powdercoat carry a warranty against cracking or peeling (losing adhesion) for three (3) years from date of delivery to the original purchaser.
WARRANTY LIMITATIONS and EXCLUSIONS
Under the terms of this limited warranty, for any door components that are found to be defective upon inspection by authorized Raynor personnel, Raynor will, at its option, repair or replace the defective door components. Labor charges for the installation or repairs shall be the responsibility of the consumer and must be performed by a qualified installer. This warranty applies only to doors that are professionally installed by a qualified installer.
This warranty extends only to the original purchaser, provided the door is installed in his/her place of business. This warranty is not transferable.
This warranty does not apply to any damage or deterioration to the door caused by abuse, negligence, missing components, accidents, use of pressure washers, dents or scratches. Shavings from trolley rails not properly removed and cleaned from the exterior door surface causing rust are not covered by this warranty. Failure to provide proper maintenance voids this warranty. Field applied paint failure is not covered by this warranty. Refer to the Care and Maintenance Instructions and Painting Instructions.
This warranty does not apply to damage caused by fire, an act of God, accident, vandalism or graffiti. Damage or deterioration caused by saltwater coastal areas (within two miles), hazardous or corrosive chemicals and fumes including, but not limited to, alkaline, acids, muriatic acids, road salt or salt environments, harsh cleaning agents, and fertilizers is not covered by this warranty.
Raynor shall not be liable for any consequential or incidental damages.
ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANT OF MERCHANTABILITY, ARE HEREBY EXPRESSLY EXCLUDED.
Some states do not allow the exclusion or limitation of consequential or incidental damages, so the above limitation or exclusion may not apply to you.
Claims for defects in material and workmanship covered by this warranty shall be made in writing with proof of purchase and photographs of the product in question to the dealer from whom the product was purchased or call Raynor at 1-800-4-RAYNOR within the warranty period. Raynor may choose to have the product returned for inspection.
This warranty gives you specific legal rights. You may also have other rights, which may vary from state to state.
Colors
Anodized Aluminum: Standard – Clear | Optional – Champagne, Black, or Light, Medium, Dark, or Extra Dark Bronze.
ArmorBrite™ Powder Coat System
Custom Colors: ArmorBrite: 188 custom powder coated colors available.
Product Details
Door | ||
Type | Commercial Sectional Garage Doors | |
Model | AlumaView AV175 | |
Size | 16′ x 14′ Max | |
Operation | Manual, Motor or Hand Chain | |
Sections | ||
Construction | Rail & Stile – minimum .05″, 5/16″ diameter screws | |
Material | Aluminum | |
Surface Texture | Smooth | |
Section Joint | Ship Lap | |
Section Thickness | 1-3/4″ | |
Gauge | N/A | |
Stiles | Extruded aluminum – minimum .05″ | |
Insulation | 3/8″ Expanded Polystyrene (in panels only) | |
Seals | Bottom Seal (3″, 4″ Gray; 3″ Yellow; or 3″ Black EPDM), Optional EPDM Header Seal | |
Trussing | Material: Optional U-bar (18-Gauge or 20-Gauge – can have up to 1 U-bar per door) | |
Panel Configuration | NA | |
Color | Clear Anodized or Optional: ArmorBrite Powder Coat System 188 custom colors available, or Bronze Anodized, Black Anodized | |
Windows | 1/8″ DSB Glass; 1/8″ 1/4″ 3/16″ Clear Tempered Glass; 1/8″ 1/4″ Tinted or Tinted Tempered Glass; 3/16″ 1/4″ Clear Glass; 1/4″ Clear Laminated Glass; 1/4″ Clear Wire Glass; 1/2″ Insulated DSB Glass | |
Track | ||
Type | Normal Headroom, Rear Mount Low Headroom, Front Mount Low Headroom, Lift Clearance, Vertical Lift, Incline, Contour, and QuikClip™ Pre-Assembled Track Options | |
Finish | Galvanized or Optional White Powder Coat | |
Size | 2″ or 3″ | |
Gauge | 13 and 16-Gauge | |
Counterbalance System | ||
Type | Torsion Spring, Tandem Shaft Torsion Spring, or Weight Counterbalance | |
Springs | Spring Inner Diameter: 2-1/4″, 3-1/2″ or 5-1/2″; Duplex or High Cycle (30K, 50K, 100K); Optional Black Powder Coat | |
Shafts | Tube (13-Gauge) or Solid (D-Shaft, 1″ Keyed) | |
Hardware/Accessories | ||
Hinges | 11, 13, 14-Gauge or Hybrid | |
Rollers | Standard (2″ or 3″) or Heavy Duty (2″ or 3″) | |
Finish | Galvanized or Optional White Powder Coat | |
Lock | Interior Slide Lock or Exterior Lock Bars | |
Seal(s) | Jamb Seal | |
Hanger Angle | 11, 13-Gauge Galvanized or 13-Gauge White Powder Coated |
Specifications and Drawings
Specifications | Word Document | PDF document |
Raynor Quick Spec | Microsoft Word Document | PDF Document |
CSI Master Format | Microsoft Word Document | PDF Document |
Standard Drawings
2-inch Track/Bracket-Mounted | ||
Normal Headroom | DWG Drawing | Adobe PDF Document |
Lift Clearance | DWG Drawing | Adobe PDF Document |
Vertical Lift | DWG Drawing | Adobe PDF Document |
Low Headroom Front-Mount | DWG Drawing | Adobe PDF Document |
Low Headroom Rear-Mount | DWG Drawing | Adobe PDF Document |
2-inch Track/Angle-Mounted | ||
Normal Headroom | DWG Drawing | Adobe PDF Document |
Lift Clearance | DWG Drawing | Adobe PDF Document |
Vertical Lift | DWG Drawing | Adobe PDF Document |
Low Headroom Front-Mount | DWG Drawing | Adobe PDF Document |
Low Headroom Rear-Mount | DWG Drawing | Adobe PDF Document |
3-inch Track/Angle-Mounted | ||
Normal Headroom | DWG Drawing | Adobe PDF Document |
Lift Clearance | DWG Drawing | Adobe PDF Document |
Vertical Lift | DWG Drawing | Adobe PDF Document |
Low Headroom Front-Mount | DWG Drawing | Adobe PDF Document |
Low Headroom Rear-Mount | DWG Drawing | Adobe PDF Document |
Technical Information
Section and Panel Schedules
Door Width | Number of Panels | Door Height | Number of Sections | |
---|---|---|---|---|
Up to 8′ 6″ | 2 | Up to 8′ 6″ | 4 | |
8′ 7″ – 11′ 11″ | 3 | 8′ 7″ – 10′ 6″ | 5 | |
12′ 0″ – 14′ 2″ | 4 | 10′ 7″ – 12′ 6″ | 6 | |
12′ 7″ – 14′ 2″ | 7 |
AlumaView Warranty
Door Sections
Raynor® warrants the door sections against defects in material and workmanship for five (5) years from date of delivery to the original purchaser. Window components are warranted against defects in material and workmanship for three (3) years from date of delivery to the original purchaser.
Hardware and Springs
Raynor warrants all hardware and spring components against defects in material and workmanship for one (1) year from date of delivery to the original purchaser.
ARMORBRITE™
Doors equipped with AmorBrite powdercoat carry a warranty against cracking or peeling (losing adhesion) for three (3) years from date of delivery to the original purchaser.
WARRANTY LIMITATIONS and EXCLUSIONS
Under the terms of this limited warranty, for any door components that are found to be defective upon inspection by authorized Raynor personnel, Raynor will, at its option, repair or replace the defective door components. Labor charges for the installation or repairs shall be the responsibility of the consumer and must be performed by a qualified installer. This warranty applies only to doors that are professionally installed by a qualified installer.
This warranty extends only to the original purchaser, provided the door is installed in his/her place of business. This warranty is not transferable.
This warranty does not apply to any damage or deterioration to the door caused by abuse, negligence, missing components, accidents, use of pressure washers, dents or scratches. Shavings from trolley rails not properly removed and cleaned from the exterior door surface causing rust are not covered by this warranty. Failure to provide proper maintenance voids this warranty. Field applied paint failure is not covered by this warranty. Refer to the Care and Maintenance Instructions and Painting Instructions.
This warranty does not apply to damage caused by fire, an act of God, accident, vandalism or graffiti. Damage or deterioration caused by saltwater coastal areas (within two miles), hazardous or corrosive chemicals and fumes including, but not limited to, alkaline, acids, muriatic acids, road salt or salt environments, harsh cleaning agents, and fertilizers is not covered by this warranty.
Raynor shall not be liable for any consequential or incidental damages.
ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANT OF MERCHANTABILITY, ARE HEREBY EXPRESSLY EXCLUDED.
Some states do not allow the exclusion or limitation of consequential or incidental damages, so the above limitation or exclusion may not apply to you.
Claims for defects in material and workmanship covered by this warranty shall be made in writing with proof of purchase and photographs of the product in question to the dealer from whom the product was purchased or call Raynor at 1-800-4-RAYNOR within the warranty period. Raynor may choose to have the product returned for inspection.
This warranty gives you specific legal rights. You may also have other rights, which may vary from state to state.